Playing with the motive could be done in any room. One was in the bathroom, especially now that many manufacturers who produce ceramic tile motifs. Bathroom this one can be an inspiration. Attractive appearance with a blend of mosaic patterns on the floor, and lines on the wall, so as not to “bump” is selected the same color tone. Beautiful is not it?

Motif obtained by arranging the line pieces of ceramic. Ceramics prepared with different size thin-thick, other than color differences. The pattern assembly like laying bricks, crowded motifs matched by the white color selection for bathroom furniture, such as shower and toilet areas. White color and features may reduce the existing motifs.

Bathroom area into private areas such as bedrooms, it will became a space that “sterile” from the crowd. For that this area is usually limited by solid insulation to prevent activities within the area exposed to the public. Hence, the bathroom is usually tightly closed and minimal sunlight. Actually, the bathroom did not have as above. Could have made room’s glass-walled shower and bathed in sunlight. Remember, the more sunlight into the bathroom, the bathroom will be healthier and not damp. It can be made for an opening in the roof (skylights), or making more transparent wall. Two things can be made of transparent material like glass.

In terms of privacy, the opening in the roof is not too much to reduce privacy bathroom, unlike the case with an opening in the wall. Transparent area on the bathroom walls allowing activities in this exposed room to public space. Prevent it, can be used curtains, such as horizontal blinds or vertical blinds. Use it, the sun can still enter into the space, privacy was maintained. When activities take place, close the curtains. When finished, go back.

1. Prepare special glue wall-cover with clean water. Mix 125 grams of a special glue wall-cover with 4 liters of cold water. This mixture is enough to put 7-8 rolls wall-cover standard sizes.

2. Measure the surface area. Make lengthwise vertical lines, Use string to outline bobble really straight.

3. Cut wall-cover slightly longer than the height of the wall. For example, to 3m high wall, 3.1m long wall-cover cut. When cutting, consider his motives.

4. Put the pieces wall-cover overturned on the floor. Brush the liquid glue into the back. Put more glue on the edges. Before installing, brush the glue to the wall to be closed.

5. Place wall-cover starting from the top of the wall. Flatten the surface with mica. Rub from top to bottom so that the remaining water is wasted.

6. In the same way, install each piece wall-cover to cover the walls to be covered. Once again, note motive (if any) to obtain details of the precise connection.